As an Amazon Associate I earn from qualifying purchases.
Problems with liners can give someone a hard time.
A leak usually causes it and when overlooked, it can cause damage.
However, there is no need to panic if you know how to solve the problem.
All you need to do is to learn to repair it.
This review will guide you through the steps to take to repair your liner yourself.
Overview for pool liner repair
Liners are used to cover swimming pools, especially the walls and floor to prevent any form of penetration.
The main reason is to keep pool water within the swimming pool.
It makes your pool look decorative.
Vinyl liners are often used for swimming pools.
A vinyl liner has a cover made of vinyl linking the water and the pool layout.
Pool liner problems affect both in-ground pools and above ground pools.
Our primary focus is on above ground pools and the type of vinyl pool liner used for in-ground pools.
Advantages of vinyl pool repair liners
- Customizable shape
- Quick construction
- Plain liner surface
- Reduced cost
Disadvantages of vinyl pool repair liners
- Not durable enough
- Liner replacements
How to patch a pool liner – Techniques/Tips
What is the best way for fixing pool liners?
- Check to know where the problem is coming from. A leak must have occurred, the bead might have loosened, or the liner needs a replacement. Don’t assume that erosion could be the cause.
- When you know where the problem is, repair leaks using a vinyl pool repair kit. Underwater leaks require a wet patch kit.
- Coins can specify leaks. Switch off your pool filter for an hour. Spray dye close to your marker, and if it is drawn to it, then you have discovered where the leak is.
- You can cover the leak with patch kits temporarily. Most people use heavy plastic for patches. The pressure from the water will keep it firm.
- Make a deep ravine to drain the water. Take up the pool liner and pour dry sand with the use of a funnel. Fill empty spaces before using your swimming pool repair kit material to patch. Cut a round patch a little bigger than the tear and apply cement to it. If the leak is underwater, allow the adhesive to dry before folding it in half. Replace the temporary patch with the new one.
- You can blow-dry to help the liner back in place. You can realign your bead by applying boiled water.
- There is a need for you to replace your vinyl liner if there are too many holes or if it is old.
Underwater pool patch – common problems
Below are the issues faced with either in-ground or above ground liners and how to fix them.
Faded pools repair liners
Sun might fade some colors of your liner, likewise chlorine, which can also bleach it.
Since there is little that can be done about this, be prepared for it.
For waterline fading as well as tears, you can remedy the situation by installing borderlines.
A borderline is an adhesive strip that can repair liners as it brightens them.
Leaking pools repair liners
Leaks do occur in a vinyl pool, but you need to locate the spot even if it is not easy.
If you want to find a vinyl pool leak easily, use a diver’s mask and snorkel to trace it.
You can add color dye to the affected areas, including the skimmers.
You can fix some liners without replacing them.
Replacing pool liner material or installing a new liner is best if the holes are too big.
Torn vinyl underwater pool patch liners
You can patch large tears using a sizeable piece of vinyl for it, but the patch may not last for long.
Some people don’t repair their vinyl liners; they just replace it with a new liner as they have the money to do so.
Patch kits work well if the leak is small and somewhere accessible.
A leak in a corner, close to lights, or steps is usually hard to repair.
If your vinyl liner is very old, wear will happen without any cause.
If your vinyl has a small crack, then there’s no need to replace it. Patch it instead.
You can repair vinyl on the wall only if the plastic is not overstretched.
Vinyl pool liner wrinkles
Wrinkles usually occur in liners.
The cause of this could be as a result of one or two things that went wrong during the liner installation or as a result of water deterioration.
Plenty of wrinkles can trap dirt, thereby aiding in bacteria and algae growth.
If the lines have been under the water level for a long time, it might be challenging to work on them.
Though they may not need replacement, there is little you can do about it.
How to patch an above ground pool liner – best practices
Best practices for dealing with vinyl liners
- Take your time when you want to measure the pool and get accurate swimming pool dimensions.
- Measure through the panel and push the tape super tight.
- As regarding the installation, ensure that the pool is dry.
- Measure the width and measure three different spots to ensure that it is accurate.
- Endeavor to measure from wall to wall.
- To get the hopper radius, you have to remove the liner to get the accurate measurement.
- The corner radius must be measured by finding the panel joint to get a 2-foot radius corner.
- The depth of the pool must be measured at 2 different sides to ensure that you get an equal measurement.
- The color of your new liner must be considered, including weather conditions.
Tools you can use for patching pool liners
With the tools below, you can repair your liner
- Large screwdrivers
- Non-abrasive scouring pad
- Swimming goggles
- Vinyl patch kit
- Dauber applicator
- Patching vinyl
Above ground pool leak repair – FAQs
Can pool liners be repaired?
A vinyl liner is usually economical but prone to wear and tear.
Any leak in your pool liner should be repaired as soon as possible with a patch repair kit.
This is because there could be a drop in the water level due to a leak, and water loss.
The weakening of the soil underneath the pool could destroy the pool wall.
How much does it cost to fix a pool liner?
Some households spend within the range of $979 and $3,285 to repair their pool liner.
Repairing a small patch is not expensive, but a total replacement can cost about $4,100.
How do you fix a tear in a vinyl pool liner?
The first thing is to use special patch material that is waterproof, tape, a vinyl repair kit, or a peel and stick patch.
Cut a reasonable amount of vinyl patch, apply glue, and bend it.
Place it at the leak point and use your hand to press it for some minutes. Let it dry for 24 hours.
How long do patches last?
A patch kit is non-permanent.
Some can last for years but not up to 15 years.
How to patch a pool without a patch kit?
You can use a piece of vinyl to make a patch.
Cut it and apply glue.
After that, place it at where there is a leak and make sure to press it well.
How to patch a pool with water in it?
Cut a piece of vinyl and use PVC glue on it.
Use alcohol to clean the vinyl outside before you enter the pool and place it under the water.
How to repair a tear in a vinyl pool liner?
Cut the patch round as it helps hold it better.
Use a piece of gum and cover it.
Apply it to the tear, press, and hold it for some minutes. You may need to apply weight to it.
How to patch an above ground pool liner?
This is not hard to do, but you may need some time to achieve it.
First of all, trace where the leak is before draining your pool.
You will need a small patch kit if the tear is not significant.
After that, you will need some items like a vinyl patch to patch your pool liner.
How to repair a liner underwater?
Use a pair of scissors, goggles or swimming mask, a piece of the vinyl patch, and vinyl adhesive glue.
Use swim goggles to identify where the hole is for patching.
With a new piece of vinyl, cut a size larger than the hole in an oval shape about 2-3 inches wider than the gap.
Apply bonding underneath the vinyl.
Go back to the area and apply the pad.
Use your fingers to secure it for several seconds until it is tight.
How to patch an above ground pool without draining it?
Cut the patch and round up the edges.
Make sure that your flax tape covers the patch.
Set it on top of the pool and hold it with your foot.
Then place a weight on top of the patch for about 24 hours.
How to fix a sagging pool liner?
Use hot water in a flask, a flat head screwdriver, and skewers.
Pour water on the sides, pull the liner up, and use a skewer to push it in about 3-4 inches at a time.
How to fix a hole in a paddling pool?
A clear rubber-like product that is very durable is often used.
Put it in the hole and smooth it out so that it does not stick.
Put a piece of duct tape, and you’re done.
VersaTape is a heavy-duty patch repair tape that can be used underwater or on dry surfaces.
It is suitable for vinyl siding, aluminum, poly sheeting, etc.
Can you paint a vinyl pool liner?
There are some pool paints explicitly made for in-ground pools with concrete sides.
There are respective pool paints used to paint vinyl liners.
When you want to get the paint to coat your liner, chose the one that can thrive well in moist conditions.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.