As an Amazon Associate I earn from qualifying purchases.
The summer season is defined by BBQ parties and several recreational activities around the pool that help you get respite from the scorching heat.
Nevertheless, you must follow a few steps at the time of opening a pool after a long winter season.
These steps are for the benefit of your pool and, in the long run, will prevent you from making a hefty investment in pool repair.
Basics regarding pool opening
Initially, it is expected that you must have all of the essential tools handy at the time you open your backyard pool.
This will help you undertake immediate measures in case anything unexpected happens.
Having the right tools by your side will make it easy to do the pool opening process in less time than expected.
You can buy everything at your local pool supply store.
Tips and techniques that you must employ to open a pool
With the help of these tips and tricks, you will keep the environment of your pool safe during the time of opening.
Some of the highly recommended actions are given below.
1. Clean the upper layer of the pool cover to open an above ground pool
You may need to take leaves, twigs, and dead insect bodies off from the pool cover before you take it off.
This is because there is a possibility that debris and dirt particles might enter your pool.
Thus, you not only have to undertake extra work but there are chances that the debris might enter inside the drain pipe and clog it.
2. Skim your pool before you open
In case you find any particles or debris floating in your pool, take care of it immediately.
Debris that stays inside the pool for quite a long time leads to contamination of the water and helps bacteria and fungi to thrive.
For the skimming process, you can even use vacuum heads as they are fully automatic and easy to work with.
3. Clean and remove drain plugs from the pipes
At the time of preparing your pool for the summer season, you need to remove the drain plugs inside the pool pipes.
This process will let the water run in and out of your pool.
If it is possible, remove the ice compensator from the pool as it might hinder the proper working of the pool.
4. Maintain the water level when opening an above ground pool
There is a probability that you may need to add some water and top up the water level.
Once the addition of water has taken place, make sure the pH level of the pool is okay and maintain it with the help of chlorine shock.
5. Clean and reinstall the pool accessories before you open a swimming pool
Lastly, you should take care of pool accessories like ladders, diving boards, chutes, and other pool equipment. These will make it easy for elderly people and children to get in and climb out of the water.
It is important to thoroughly inspect and clean the ladders and other pool accessories before you install them.
If possible, lubricate the nuts and bolts at the time of installation.
This process will help you to secure them from getting rusted during the summer season.
Opening a pool common problems
At the time of opening the pool, a few issues might surface and if not taken care of quickly, there are chances that they might give rise to greater problems.
The dirty base of the pool
One of the most common problems is that you might find a large number of bacterial and fungal spores at the base of your pool.
In such a situation you need to make sure to clean the surface with the help of vacuum heads.
This type of equipment is easy to operate as it is fully automatic and made of transparent material.
Thus, you will get to know when it is full.
Improper pH balance
A higher pH level in the pool is a vindication that the water might have got contaminated with several micro-organisms.
In such a situation, use either liquid chlorine or a chlorine tablet to shock the pool water, this process will help you lower the pH and maintain it around 7.2 to 7.7.
Thus, all the bacterial and algal spores in the pool water will get destroyed immediately, and you can even swim in the pool after fifteen to twenty minutes. But it’s best to wait 24 hours to make sure.
Water is not flowing properly through the pipes
If you are dealing with such a situation, see whether the water pipe plugs are off or not.
If they are and you’re still dealing with the issue, then try cleaning the pipes as there’s a possibility that they might be clogged with debris.
Use a garden hose to flush out pipes.
How to open an inground pool – best practices
There are several effective ways that most people employ to open a pool.
In case you are planning to open your swimming pool for the first time, here are a few easy and effective practices that you must follow.
Proper safety inspection before opening a pool
At the time of opening your pool for the summer season, you need to undertake some safety inspections.
Check whether your pool cover has any leaves, twigs, and debris or not.
Moreover, you should also inspect the surface of the pool thoroughly and clean it with the help of pool equipment such as vacuum heads, garden rake, telescopic pole, etc.
Remove the cover and winter plugs to open your pool
Use a pool cover pump to remove water and small debris from the pool cover.
Allow the cover to fully dry before storing it away for the summer.
Once you carefully remove the cover of the pool, then it is time to remove the plugs from the pipes.
This process will help you to drain the pool water and allow cleaning the inner surface.
At last, fill up the pool and check the pH level and other pool chemical properties.
Check on the filter and pool pipes
At the time of the pool opening, keep in mind that you also have to check on the condition of the filter and pipes that run in and out of the pool.
If required, then undertake a thorough filter and pipe cleaning process as it will help you get crystal clear water and saves you from making hefty investments in repairing the filter during the summer.
Tools and pool chemicals that you require for opening
To open your pool for the summer season you should have certain tools and pool chemicals handy.
Some of the most important tools that you might use to complete the process with flying colors are given below.
To maintain the proper pH level of your opened pool water you should shock it with the help of liquid chlorine.
Low pH levels will make it impossible for algae and bacteria to thrive in your pool water.
In addition to this, you can even use chlorine tablets for a similar purpose; you might even rub the tablets on the inner lining of the pool.
Telescopic poles will offer you ease in getting rid of any leaves or debris that might be present on the pool cover.
This instrument is light in weight and quite handy to use with a pool cover pump also.
Moreover, you can even use it to remove any debris that is present inside the pool; the length of the telescopic pole can be adjusted as per the requirement.
Vacuum heads are easy to use as they are fully automatic and clear the debris and bacterial spores present in the pool water.
You can easily use them to clean the corners of your swimming pool without much effort.
Moreover, it is easy to clean them as they are made of transparent material.
At the time of the pool opening, you will use several chemical agents; this is the reason why you must wear gloves as protective gear.
In case your pool is swarming with algal spores, you should take immediate steps by placing an adequate amount of algaecide in the pool.
Algaecide will help you get rid of algal spores in time or there is a possibility that they might cause permanent staining of the pool surface and filter.
To take off the pool covering you should use a wrench.
This tool will impart less force on your hand even while removing the nuts and bolts of the cover.
Swimming Pool Openings – Frequently Asked Questions
What chemicals do you need to start up a pool?
To start a pool proficiently you require the following chemicals: chlorine tablets, cyanuric acid, granular chlorine shock, algaecide, etc.
How do you start a pool after winter?
Once the winter season is over, you need to clear the pool covering, skim the inner surface, and unplug the pool pipes.
Let the cover fully dry before storing it away.
Then you should maintain the water level in the pool and you need to add liquid chlorine or tablets to balance the pH level.
Also, check the condition of the pump and filter before operating them.
How do you open an above ground pool for the first time?
There are a few steps that you should take into consideration at the time of opening the above ground pool, like removing debris from the cover and draining excess water.
You need to increase the temperature of the pool water to the required level, and you should clean the surface with the help of a skimmer or filter vacuum heads.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.