As an Amazon Associate I earn from qualifying purchases.
There are a lot of things that can go wrong when installing an above ground swimming pool.
Some of these common errors cause it to end up badly installed.
An example of these problems is creasing in your liner.
According to pool installers, when your pool’s uprights are misshaped, there is a high chance your pool will end up badly installed.
The most common shortcoming of installing an above ground pool by yourself is that the ground ends up uneven.
The swimming pool bottom can be off level, rough, or lumpy, and end up leaning to one side.
Most people bypass the process of leveling the ground, thus ending up with one side higher than the other.
However, it’s possible to level an above ground pool without draining it.
The process is time-consuming and requires hard work, but it’s worth the effort.
In this guide, we are going to look at how you can level an above ground swimming pool with water in it.
If you notice your swimming pool is off by a few inches, start making plans to level it before the onset of summer.
Luckily, there are easy ways to level your swimming pool without taking it down.
Before we go ahead to look at the steps you should follow to level it, let’s start by looking at the causes of uneven pools.
Set on uneven ground
Pools set on uneven ground with ¾ inch variation cause excess pressure on one side.
If you notice this upon installation, the best option would be to fix it right away to avoid the situation getting worse in the future.
In such a scenario, the best option would be leveling the surface without taking the pool down.
Variation from leg to leg
Variation from leg to the leg should be corrected the moment you notice it as more pressure will be inserted on one leg.
This issue can, however, be rectified without the need to take your pool your pool down.
To confirm the level of the legs, you should use a bubble level when the pool is 3 inches full.
If you do not notice any variation, check when the pool is full.
Washout under the pool
This easily happens if you have built your pool in a sloped backyard.
In such a case, water easily runs out of the pool and washes out the soil.
When that happens, you must reset your pool by evening out the ground.
You can use leveling blocks.
Mice under your pool
If a mouse burrows under your pool, that area tends to hollow out, causing the surface to sink.
This can also be caused by one area experiencing more pressure than the rest.
Techniques/Tips to Improve
Before you go ahead and level your above ground pool, there are a few techniques you should follow to improve the exercise:
- Drain your pool a bit
- Make sure you have protective gear
- Seek help from a pool expert
- Have all the necessary tools at your disposal
- Work gradually and persistently until you get an even surface
Correcting common problems
If you are facing the above issues can go ahead and resolve the issue by leveling the ground.
In this section, we are going to look at steps you should follow to level an above ground pool without dismantling it.
Drain some water
Start by draining some water by using a garden hose.
You only need to drain it halfway before beginning the leveling process.
Never try to level your pool when it’s full, as it will be difficult.
One thing to note when draining water is making sure the drained water runs away from your pool.
Put on protective gear
As it drains, put on protective clothes and other items you use when cleaning.
Protective clothes help protect you from injuries when working.
Remove the leveling blocks
Go ahead and remove the blocks from under your pool and evacuate the ones on the lower side.
Do not try to lower the higher part of the pool as this will be more complicated.
Note, if your pool is completely off-level, the best you can do is repeat the installation process as this will be extremely difficult.
Pry up the wall
Using a shovel, wrench the wall of your pool from each bottom connector until you achieve the right level.
Reinstall the blocks
Here you should return the blocks you removed in step three.
Returning the blocks is a bit complicated, and you should hammer them back into place on each side.
Focus on the lower side of your pool
The next step after reinstalling the blocks should be repeating steps 3 and 4 above on the low side of your pool.
Pack the earth
Pack soil under the section in your pool where you lifted the pool walls.
Use packed soil for the best results.
Refill your pool
The final step should be refilling your pool.
The problem will be fully solved if you packed the underneath surface well.
Analysis of the best practices in the industry
Pools that rest on uneven surfaces cause safety concerns.
The occurrence of deep and shallow ends on an above ground pool is risky for kids and pets.
To avoid such situations, pool experts advise choosing a leveled area to install the pool.
In case your backyard is unlevel, invest time in leveling the ground before proceeding to installation.
Tools you can use
When leveling an above ground pool with water in it, the following tools are essential:
- A shovel
- Garden hose
Frequently asked questions
How unlevel can an Intex pool be?
An Intex pool looks slanted the moment it becomes uneven by more than an inch.
How do you level an uneven pool?
To level an uneven pool, you should follow the mentioned steps precisely.
Raise the lowered part as it is less complicated than lowering the raised part.
Note that you should level the bottom track and not the surface inside your pool.
If you level your above pool accordingly, it can serve you for years without any problems.
Resources & further reading
Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.